Aimpoint Duty RDS Kullanıcı Kılavuzu - Sayfa 6

Büyüteçler Aimpoint Duty RDS için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aimpoint Duty RDS 12 sayfaları.

c Insert battery (5) with the positive end (+) toward the

battery cap (4) as seen in Fig. 1.

CAUTION: Check that the o-ring on the battery cap (4)

is in position and in good condition to ensure there is no

water leakage into the battery compartment.

d Tighten the battery cap (4). When resistance is

encountered, proceed to tighten until the battery cap (4)

is fully tightened.

NOTE: For long term storage of the sight, remove the

battery.

2.2 Turn ON / OFF and adjust red dot intensity

• Press any of the push-buttons (1)

the sight ON.

NOTE: The sight will always turn ON at setting 7 of 10.

• Press

• Hold

NOTE: Intensity setting 1 - 4 are intended for use with

NVD and intensity setting 5 - 10 for use in daylight.

to increase red dot intensity.

to decrease red dot intensity.

to turn the sight OFF.

to turn