ClearSounds Quattro 4.0 Hızlı Başlangıç Kılavuzu - Sayfa 4

Amplifikatör ClearSounds Quattro 4.0 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ClearSounds Quattro 4.0 4 sayfaları. Neckloop with removable bluetooth mic (bt4)
Ayrıca ClearSounds Quattro 4.0 için: Hızlı Başlangıç Kılavuzu (4 sayfalar)

Sayfayı Yazdır

WEARING THE QT4 MIC CLIP

The QT4 Mic Clip can be worn in multiple ways.

OPTION 1: On Clothing-

Attach it to the speaker's

clothing using the metal plate.

For optimum performance,

place the clip as close to the

speaker's mouth as possible.

PAIRING AND CONNECTING THE QT4 MIC

The QT4 Mic comes already paired from the factory; however, if for some reason it was removed from

the paired list, it's easy to re-pair it.

PAIR

STEP 1: Ensure

Quattro 4.0 is turned off,

then press and hold MFB

for approximately six

seconds until "Pairing..."

appears on screen.

STEP 3: The Quattro 4.0

announces "Paired,"

and then "Device

(number) connected."

"CS QT4 Mic" appears

on screen.

OPTION 2: Using the Lanyard -

Attach the lanyard to the hole in the

metal plate. The metal plate attach-

es magnetically to the back of the

clip. Hang the lanyard around the

speaker's neck and slide the plastic

adjuster to customize the length.

STEP 2: Quickly pair

and connect the QT4

Mic: On the Mic, press

and hold MMFB until

light flashes red and

blue.

TIP: The QT4 Mic must

be within 33 feet of the

Quattro 4.0 to operate

correctly.

CONNECT & USE

STEP 1: Place QT4 Mic in a

position that best captures

the voice(s) that you want to

hear. On the QT4 Mic, BRIEF-

LY press MMFB on the Mic

and the device will begin

connecting to the

Quattro 4.0.

STEP 3: Scroll through the

four levels of audio sensitiv-

ity by pressing and releasing

the MMFB until you reach

your desired level.

OPTION 3: In the Car-

When riding in a car,

you can attach the clip

to the speaker's seat-

belt the same way you

would to clothing.

STEP 2: The Quattro 4.0

displays "Incoming" and

automatically connects.

HOLD

STEP 4: To terminate

connection, press and

hold MFB. The Quattro

4.0 announces, "Call

Terminated."