ClearSounds CS-WS1 Kullanıcı Kılavuzu - Sayfa 4

Çalar Saat ClearSounds CS-WS1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ClearSounds CS-WS1 13 sayfaları. Clear sounds communication wake & shake large display alarm clock & telephone ring signaler user's guide

Sayfayı Yazdır

Installation

Your Wake & Shake offers you the option of using it as both an

alarm clock and a telephone ring signaler. The following diagram shows

you how to set up your Wake & Shake so you may use it for both.

NOTE: Setting up your Wake & Shake as a tele-

phone ring signaler requires the use of a dual

phone jack adapter. This is a small inexpensive

device available at your local drug or hardware

store. (See #1)

1.Plug Dual Phone Jack Adapter into wall jack.

2.Plug telephone line from your telephone into one jack on adapter.

3.Plug one side of line cord (included) into phone jack on the back of

the clock and the other into the available jack on the adapter.

4.Plug the AC power adapter into the adapter jack on the back of the

clock.

5.Plug the AC power adapter into an electrical wall outlet.

6.Plug the Bed Shaker into the jack in the back of the phone.

Now your Wake & Shake is ready for use. Simply set the time &

alarm and you are ready to go.