ClearSpan R030A00008 Manuel - Sayfa 3
Çadır ClearSpan R030A00008 için çevrimiçi göz atın veya pdf Manuel indirin. ClearSpan R030A00008 13 sayfaları. Twin-wall polycarbonate end panel kit 30' wide & 35' wide
Sayfayı YazdırYOU MUST READ THIS DOCUMENT BEFORE YOU
INSTALL THE END PANEL POLYCARBONATE KIT.
Thank you for purchasing this ClearSpan™ Twin-Wall
Polycarbonate Kit. When properly assembled and
maintained, this product will provide years of reliable
service. These instructions include helpful hints and
important information needed to safely assemble and
properly maintain the end panel kit. Please read these
instructions before you begin.
If you have any questions during the assembly, contact
Customer Service for assistance.
SAFETY PRECAUTIONS
•
Wear eye protection.
•
Wear head protection.
•
Use a portable GFCI (Ground Fault Circuit
Interrupter) when working with power tools and cords.
•
Do not climb on the shelter or framing during or after
construction.
•
Do not occupy the shelter during high winds,
tornadoes, or hurricanes.
•
Provide adequate ventilation if the structure is
enclosed.
•
Do not store hazardous materials in the shelter.
•
Provide proper ingress and egress to prevent
entrapment.
WARNING: The individuals installing the end wall are
responsible for designing and furnishing all temporary
bracing, shoring and support needed during the
assembly process.
For safety reasons, those who are not familiar with
recognized construction methods and techniques
must seek the help of a qualified contractor.
Revision date: 06.02.09
Important Information
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the end wall. Additional tools and supports may
be needed depending on the structure, location, and
application.
•
Tape measure or measuring device
•
Fine point marker to mark the location on frame and
panels
•
Variable speed drill and impact driver (cordless with
extra batteries works best)
•
Metal file and metal-cutting saw
•
Scissors or utility knife and tool to cut polycarbonate
panels
•
Hammers, gloves, and eye protection
•
Ladders, work platforms, and other machinery for
lifting designed to work safely at the height of the
building and end wall.
ATTENTION: Consult the services of a qualified,
professional contractor if you are not familiar with the
construction of similar frame structures or the installation
of comparable polycarbonate panels.
3