Altra Industrial Motion Warner Electric PB-120 Kurulum Talimatları Kılavuzu - Sayfa 4

Endüstriyel Ekipmanlar Altra Industrial Motion Warner Electric PB-120 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Altra Industrial Motion Warner Electric PB-120 18 sayfaları. Primary brakes

Sayfayı Yazdır

Send Quote Requests to [email protected]

PB-170

Assemble the splined armature to the hub . The shiny

side of the armature should be against the hub retainer

ring .

Assemble the release spring into the groove in the

hub spline . The curved portion of the spring should be

against the armature . (Figure 4)

PB-250

Insert the hub, with snap ring intact, into the armature

from the backing plate side . (Figure 5)

Insert both release springs into the holes of the backing

plate . Bow the springs as necessary to insert them into

the armature . (Figure 6)

4 Warner Electric • 800-825-9050

Figure 4

Figure 5

Figure 6

Send Quote Requests to [email protected]

Call +1(800)985-6929 To Order or Order Online At Warnerelectricparts.com

PB-400

Insert the release springs into the backing plate holes

of the armature . Bow the springs as necessary to insert

them into the armature . (Figure 7)

Figure 7

Remove the snap ring from the hub .

Insert the hub, with the setscrew end first, into the

armature from the segmented side . Slide the hub into the

armature until the release springs engage the snap ring

groove . (Figure 8)

Figure 8

Assemble the snap ring into the groove in the hub,

clamping the release spring against the end of the spline .

(Figure 9)

Figure 9

P-201-WE • 819-0480