ClearSpan 104903 Montaj Talimatları Kılavuzu - Sayfa 11

Sera Kiti ClearSpan 104903 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. ClearSpan 104903 19 sayfaları. Premium solar star greenhouse

Sayfayı Yazdır

Diagram

may show a

greenhouse

of a different

length.

31. Set the first long roof panel in place (next diagram)

and secure it to the lower roof support plates from

the inside.

REMEMBER: The lower roof support plates are

attached to the top edge of the small side panels.

Angled End

Panel

Install all roof panels with the extended polycarbonate

drip edge at the lower end of the panel.

ATTENTION: Roof panels are flush with the end panels.

They do not rest on top of the end panels. See diagram

in the next column.

Visit www.ClearSpan.com for additional products and customer assistance.

Attach flat

brackets in

the areas

identified by

arrows.

Roof

Support

Plates

Roof Panel Drip

Edge

Hinged

Side Panel

The following diagram shows the union of the long roof

panel and the small side panel as seen from the outside

of the greenhouse. The lower roof support plates and the

3" x 3" square brackets secure roof panels.

Long Roof Panel

Panels are flush.

Dashed line indicates the

drip edge of the roof panel.

Small Side Panel

NOTE: Solid horizontal line shows the panels on the

same plane.

32. Secure the roof panel to the end panels using Tek

screws and the 3" x 3" flat plates (Step 30).

33. With the first long roof panel in place and secure,

take one short (non-vented) roof panel and set it in

place on the greenhouse.

Panels are flush.

NOTE: Diagram shows the union of the two roof panels

at the peak of the greenhouse.

Angled End

Panel

Long Roof Panel

10 of 18