ClearSpan R020B00001 Manuel - Sayfa 8

Sera Kiti ClearSpan R020B00001 için çevrimiçi göz atın veya pdf Manuel indirin. ClearSpan R020B00001 17 sayfaları. Steel end frame kit 20' wide

Sayfayı Yazdır
END FRAME INSTALLATION (CONTINUED)
6. Attach each end of the two (2) upper horizontal braces to the end rafter using the 108506 mounting brackets and
Tek screws as shown below. Position bracket so that a Tek screws can be attached through both lips of the hat
channel and into the bracket (6b and 6c).
7. Attach each end of the lower braces directly to the ground posts or rafter legs using Tek screws as shown below.
Align edge with the outer edge of the rafter leg or ground post.
8. Read the care and maintenance section that follows.
6a
8
End Frame Assembly
6b
Hat
channel is
not shown.

OUTSIDE VIEW

GROUND LEVEL
7a
6c

INSIDE VIEW

ATTENTION: Use two sections of hat
channel to create the two upper end
wall braces. Cut to length and overlap
as needed.
7b
Revision date: 09.30.10