Dixon Bayco VR6100 Series Kurulum ve Kullanım Talimatları - Sayfa 4
Sıhhi Tesisat Ürünleri Dixon Bayco VR6100 Series için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları indirin. Dixon Bayco VR6100 Series 5 sayfaları. Vapor elbow push-on style
Sayfayı YazdırVR6100 Series Vapor Elbow Push-On Style
1. Inspect elbow for missing or damaged parts, make sure the seal
(item 4) is in place.
2. Remove any obstructions from the manhole before removing filler
cap and connecting the elbow.
3. Securely fasten the elbow to the adapter in the manhole before
connecting hoses.
4. Check that the vapor and liquid hose connections have seals in
place and then couple hoses to elbow.
To Couple
1. Firmly push the handle bar (item 6) vertically down onto service
station adapter until locking arms pop in and ensure full clamping
(handle bar cannot be moved any farther).
2. Check locking arms (item 2) on adapter.
To Uncouple
1. Push down the handle bar (item 6) and then squeeze the handle
bar (item 6) and the lift handle (item 3) until locking arms (item 2)
disengage.
Failure to have hoses connected can cause product
spillage or vapor loss resulting in a potential fire or explosion, or
water or soil pollution.
Do not activate system until all connections are coupled.
Do not put your figures between the handle bar (item 6) and
the lift handle (item 3).
Dixon Bayco vapor elbows are tested at the factory and are in proper
working condition when shipped. Vapor elbows are designed to be
tough and to provide long service with reasonable care and handling.
To ensure long service, Dixon Bayco elbows should not be thrown,
dropped or dragged; such actions may compromise the integrity and
reduce the service life of the product.
4
Installation
Care and Handling
877.582.3569
VR6100 SERIES