Altrad BELLE HDC 350 Operatör El Kitabı - Sayfa 12

Testere Altrad BELLE HDC 350 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Altrad BELLE HDC 350 16 sayfaları.

•

WARNING

Start

•

Stop

•

CAUTION

Cutting

When Taking a Break

•

the start and stop device.

Pre-start Checks

Start and Stop Procedure

Before you operate or carry out any maintenance on this machine YOU MUST READ and STUDY

this manual.

Operating Instructions

Diamond blades can become dull when the wrong feeding pressure is used or when cutting in certain

materials, such as heavily reinforced concrete. Working with a blunt diamond blade causes

overheating, which can result in diamond segments coming loose. Sharpen the blade by cutting in a

soft material such as sandstone or brick.

The blade can become out-of-round and vibrate if an excessive feeding pressure is used. A lower

feeding pressure can stop the vibration. Otherwise replace the blade. The blade must be of the

recommended type for the material to be cut.