Edgewater Networks 200AE2 Hızlı Başlangıç Kılavuzu - Sayfa 4
Ağ Geçidi Edgewater Networks 200AE2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Edgewater Networks 200AE2 7 sayfaları. Network services gateway
Sayfayı Yazdır
Make sure that the power and status LEDs denoted by "A" and "B" in the figure below
are solid green after a short while.
Step 2 − Configuring the EdgeMarc
1. The EdgeMarc device is preconfigured with a LAN address of 192.168.1.1 and a subnet
mask of 255.255.255.0.
Configure your computer Ethernet adapter's IP address to any address other than
192.168.1.1 in the same subnet mask, for example 192.168.1.2
Note:
2. Launch a web browser on the PC and enter the following URL:
press Enter
3. The following login window should appear:
4. Enter "root" in the User name field and "default" in the Password field.
If you're using a LAN switch, it must support 100Mbps full duplex.
http://192.168.1.1
and
Page 3 of 7