diybook KG Garden Gate Closer GTS 120 Montaj - Sayfa 8
Çim ve Bahçe Ekipmanları diybook KG Garden Gate Closer GTS 120 için çevrimiçi göz atın veya pdf Montaj indirin. diybook KG Garden Gate Closer GTS 120 9 sayfaları. Garden door-closer
Ayrıca diybook KG Garden Gate Closer GTS 120 için: Montaj Talimatları (7 sayfalar), Montaj Talimatları Kılavuzu (7 sayfalar)
Sayfayı Yazdır
gardengatecloser.com
a diybook KG brand
Step 6: Insert and tighten garden gate closer
For easier mounting, the garden gate closer is pre-loaded when delivered. For inserting the gate closer, open the gate
until the gate closer can be put into the respective holes without applying any force. The thicker end of the closer is to
be put into bracket 1 (near the wall). The slimmer end is being inserted into bracket 2 (on the gate).
Finally, the gate closer is fixed using the cap nuts. Therefore screw on and tighten the cap nuts using the locknuts. In this
step the nuts must be tightened in such a fashion, so that the threaded rods are straightened and stand in right angles
to the mounting bracket.
Note: In most cases, the pre-loading security bolt loosens by itself during this procedure. In case that the bolt remains,
carefully move the gate just a few millimetres towards its opening direction!
diybook KG
Korneuburger Strasse 68-70/2
AT-2102 Bisamberg, AUSTRIA
UID-Nr: ATU67654415, DE313733795
FB-Nr: FN 387443 w
telephone: +43 2262 712 51
fax: +43 2262 712 51-77
email: [email protected]
website: https://gardengatecloser.com
page 8