Edgewater Networks EdgeProtect 7300 Donanım Kılavuzu - Sayfa 4

Ağ Donanımı Edgewater Networks EdgeProtect 7300 için çevrimiçi göz atın veya pdf Donanım Kılavuzu indirin. Edgewater Networks EdgeProtect 7300 16 sayfaları. Enterprise session border controller 7000 series
Ayrıca Edgewater Networks EdgeProtect 7300 için: Donanım Kurulum Kılavuzu (18 sayfalar)

Sayfayı Yazdır

1. Connecting the Power and Cables

7300 Hardware Guide

Erase

VGA

Ports 4-5-6

Port 3 - Management interface

Port 2 - WAN interface

Port 1 - LAN interface

USB

Console

1 Click – No action

2 Clicks - Reset CLI and GUI password – no service interruption

3 Clicks - Restore to factory default and reboots the system

Currently not used

1 x 10/100/1000 Mbps RJ-45 Ethernet port for optional management network

connectivity, this interface must not be on the same network as the WAN or LAN

subnets. This network cannot be within a subnet contained in a "Route"

statement

1 x 10/100/1000 Mbps RJ-45 Ethernet port for connectivity to the WAN or

Internet network connectivity - Default IP: none

1 x 10/100/1000 Mbps RJ-45 Ethernet port for LAN network connectivity

Default IP: 192.168.1.1

Currently not used

1 x RJ-45 console port for management – 9600-N-8-1 NONE for flow control –

RJ-45 to DB9 console cable included in system box