DIYtrade SF-LM17 Kullanıcı Kılavuzu - Sayfa 4
DJ Ekipmanları DIYtrade SF-LM17 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DIYtrade SF-LM17 8 sayfaları. Moving head light 90w-120w led
Sayfayı Yazdırmay destroy the device!
Protect the product against dus!Dust may reduce the protective insulation,which may cause fatal
electric shocks!
The product must be operated at altitudes ranging beween 20m below and 3000m above sea level
only!
The product must not be operated during thunder storms;risk of destruction from surge voltages!
The product must be operated at a minimum distance of 0.5m to lit objects only!
5. Installation
This product can be operated suspended or as stand-alone system.
Should your lighting effect show any signs of damage,do not install the device!In this case,have
your lighting effect repaired by your specialized dealer.The manufacturer does not accept
responsibility or liability for damage to property or personal injury resulting from an improperly
installation!
As a stand-alone system the device must
planar,firm,fireproof,shock-
and vibration-free surface.The installation of this lighting effect must be carried out by trained and
professional staff!The installation of this lighting must only be carried out with the appropriate
materials!
The suspended installation of this lighting effect necessitates a suitable suspension system!The
lighting effect must never be fixed swinging freely in the room.No individuals should linger
underneath the lighting effect during suspended installation!
It is a must to install this device with a second independent fixture.Such second fixture must
guarantee in the event of failure of the main fixture that no assembly parts will fall down.Use the
fixture on the undersurface only.
The light effect unit must be attached via two certified hooks and omega bracket to a tie-bar
system.Use the screw threads on the undersurface only.
It must be ensured that an expert inspects the mechanical and safety-relevant installation prior to
the initial operation and following major modifications,prior to the renewed operation.It must be
ensured that an expert inspects the mechanical and safety-relevant installation at least once a
year.It must be ensured that an expert inspects the mechanical installation and the installation of
relevance to safety within the framework of an acceptance test at least every four years.
The installation fixture must be as such that it can withstand for a period of 60minutes 10 times the
load capacity without harmful deformation.
It is prohibited for any individual to unnecessarily stay or pass beneath the installation during any
type of assembly work.
The light effect unit must be secured by a safety arrester cable if fly-mounted.The cable must
withstand 12 times the weigh of the light effect unit Use arrester cables equipped with quick closing
links.The dropping distance must not exceed 20 cm.Defect arrester cables or arrester cables that
have already been exposed to stress must not be used.
6. Operation
Controls
Link all DMX devices with a DMX-512 controller by using a standard,3-pin DMX cable.Connect the
output of the first device with the input of the second device and the output of the second device
with the input of the third device and so on.
Connect the mains plug to an outlet.
ATTENTION：
RISK OF SHORT CIRCUIT！
be installed vertically on an
ATTENTION：
RISK OF SHORT CIRCUIT！
4/8
absolute