EDI NSM-3E Kullanım Kılavuzu - Sayfa 11

Monitör EDI NSM-3E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. EDI NSM-3E 16 sayfaları. Enhanced signal monitor

Sayfayı Yazdır

3.4.3 WALK DISABLE

Set this switch to the ON position to remove the Walk inputs from Red Fail and Dual
Indication monitoring. See Sections 1.3.1 and 2.2.2

3.4.4 CVM LATCH

Set this switch to the ON position to change a CVM fault to the latched state. See Section
1.4.2.
3.4.5 24V LATCH
Set this switch to the ON position to change a 24V-1 or 24V-2 fault to the latched state. See
Section 1.4.1.

3.4.6 LEDGUARD

Set this switch to the ON position to Enable the LEDguard function. See Section 2.5

3.4.7 OPTION A

This DIP switch is currently not assigned.
Eberle Design Inc.
NSM-3E Signal Monitor Unit
Operations Manual
Page 7