Altrex SHUTTLE Manuel - Sayfa 9

İnşaat Ekipmanları Altrex SHUTTLE için çevrimiçi göz atın veya pdf Manuel indirin. Altrex SHUTTLE 20 sayfaları.

7. Disassembling the Shuttle

The Shuttle should be disassembled in reverse order, as described in the assembly instructions.

8. Inspection, care and maintenance

1. Shuttle parts must be handled and transported with care in order to avoid damage.

2. Storage should be organised in such a way that only undamaged parts, in the correct amounts, are available for assembly

of the Shuttle.

3. Check all parts for contamination. Clean contaminated parts.

4. Check all moving parts for correct functioning and check that these are not filthy.

5. Check the safety clutch of the winch. This is done easily by hoisting a load that is heavier than 30 kilograms. The safety

clutch should then start slipping.

6. Check all parts for damage. Damaged, worn-out or incorrect parts may not be used. Replace these parts only with original

Altrex parts. To prevent accidents, these parts must be mounted in the same way as the part that is replaced. Mounting

(fastening) and/or repair are at your own expense and risk. Altrex shall not be liable for damage resulting from erroneous

mounting and/or repair.

7. The Shuttle must be inspected periodically by an expert.

Please visit www.altrex.com/warranty to view the clauses of the Altrex warranty.