ClearWater Lights Erica Kurulum Kılavuzu - Sayfa 4
Motosiklet Aksesuarları ClearWater Lights Erica için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. ClearWater Lights Erica 16 sayfaları. Kawasaki concours 1400 led light kit dimmable patent pending
Ayrıca ClearWater Lights Erica için: Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (8 sayfalar)
Sayfayı Yazdır
Step 1: Parts List & Bike Preparation
Bike Preparation:
• First, park the motorcycle on hard pavement or concrete to insure the
bike will be stable during the installation. If you can mount the bike on a
stand with tie-down straps, this will help secure the motorcycle.
• Follow the manufacturers guidelines for disconnecting the battery. This
is important to prevent damage to the electrical system.
Erica / Krista / Sevina Technical:
Erica / Krista / Sevina are very bright LED auxiliary lights. Do not
use these with oncoming traffic present unless the dimmer is turned
down all the way. Krista / Erica / Sevina are designed as off road only
light's due to the powerful light output and specific beam pattern they
boast. The wide circular pattern is very useful on mountain roads when
on a motorcycle, as it keeps light on the road and in the tree canopy. As
the bike leans, lights are still focused on the road. Be certain to use the
lights in a manner that does not blind oncoming traffic.
Erica / Krista / Sevina can also be used in a "low" beam mode
and a "high" beam mode. The factory handlebar high beam switch is
used to select the two different Erica / Krista / Sevina modes.
Krista light output is about 2400 lumens each light while only
using 35 watts of power. Erica light output is about 6000 lumens each
light while using about 60 watts of power. Sevina commands about 7000
lumens each light using about 70 watts of power. Erica / Krista / Sevina
are easy to install and have many, many uses.
Installation Tips:
There are two main parts to the installation of your new
Clearwater Lights. The mechanical portion, and the electrical portion.
With this manual, we will go over the basics of both which should allow
you to get your lights up and running. If you purchased a bracket made
specifically for your bike, refer to our manuals online for that specific
installation at:
Note:
Motorcycle needs to be turned on before the lights will function.
Page 4
www.clearwaterlights.com
Page 3