Acoustics E120 Kullanıcı Kılavuzu - Sayfa 4

Stereo sistemi Acoustics E120 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Acoustics E120 9 sayfaları. For models qi0120 & qi0122
Ayrıca Acoustics E120 için: Kurulum Kılavuzu (11 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar)

Sayfayı Yazdır

1 x Power supply

2 x 7m speaker cable

extension cable

1 x Indoor DAB

6 x Rubber grommets

antenna

+ 1 x extraction tool

Feature summary

Wired Connectivity:

DAB / FM – F-connector socket, allows a connection to a DAB / FM antenna (indoor antenna supplied).

Analogue audio input – 3.5mm stereo jack (on same connector as optical digital) allows a connection to an

external analogue audio source such as a CD player.

Optical digital input – mini TOSLINK (on same connector as analogue) allows connection to an external

digital audio source such as a TV.

Speaker output – Imo sockets, allowing connection to a pair of passive speakers.

Analogue line output – 3.5mm stereo jack, allows a connection to an external sub-woofer, amplifier or the

input of a another E120.

Wireless Connectivity:

Bluetooth® – An international wireless connection used for streaming audio from all compatible devices.

Control:

AVRCP – A Bluetooth control protocol that synchronises your device control of Volume and Mute for easy

integration of our Q Acoustics speaker.

Infra-red – A waterproof remote control for easy line of sight basic congtrol .

Acoustic:

Stereo / mono switch – Sets the speaker output as either separate left and right, or combined mono outputs.

Fixed / variable line out switch – Sets the line output as either variable (adjusts with speaker volume) or fixed.

1 x Antenna extension

cable + adaptor

E120

INSTALLATION GUIDE

USER GUIDE

1 x User guide +

installation guide

Connecting the system and powering on

E120 is supplied with all the cables and wall box to fully install the system. Please refer to the 'E120

installation manual' which provides all details on the positioning and cable requirements of the system.

Physical connectivity:

DAB / FM ANTENNA – Connect a suitable DAB / FM antenna using the supplied connecting cable.

SPEAKER OUTPUTS – Connect the left and right speakers here using the supplied connectors.

DC POWER – Only use the supplied power supply and adapting extension cable to power the unit.

LINE OUTPUT – A separate amplifier or sub-woofer can connect using a 3.5mm stereo jack socket.

AUX INPUT – Connect an external input here such as TV, use analogue 3.5mm stereo jack or mini

TOSLINK optical digital.

Configurable Switches:

There are two small switches mounted on the lower PCB that adjust the audio mode

outputs. After making a switch position change you will need to power down the

E120.

SWITCH 1 OFF – Line output is variable, adjusts with amplifier volume.

SWITCH 1 ON – Line output is fixed at 100%

SWIITCH 2 OFF – Amplifier speaker outputs are in stereo mode with separate left

and right channels.

SWITCH 2 ON – Amplifier speaker outputs are in mono mode with both left and right

channels combined on both speaker outputs.