Clearwater Spas CLEAR A-400 Kullanıcı Kılavuzu - Sayfa 9

Spa Aksesuarları Clearwater Spas CLEAR A-400 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Clearwater Spas CLEAR A-400 20 sayfaları.

Your spa comes with an ozone system (an oxidizer) which burns up

organic material (body oil, urine, etc.). Potassium Monopersulfate

(spa shock) may also be needed as an oxidizer if bather load is

unusually heavy. Two ounces of spashock for every 6-8 people or 6-8

uses is recommended.

SECOND VISIT (Week 2):

1. Check the pH and TA using the provided four-in-one test strips.

Once your levels are set correctly, continue to check your levels

weekly.

2. Check the copper level using the provided copper test kit. Once

your levels are set correctly, continue to check yourlevels weekly.

THIRD VISIT (every week):

1. Check the pH and TA using the provided four-in-one test strips.

Once your levels are set correctly, continue to check your levels

weekly.

2. Check the copper level using the provided copper test kit. Once

your levels are set correctly, continue to check your levels weekly.

GENERAL GUIDELINES:

A good guideline is to check filters after every 6-8 people have soaked

in the tub, or every 6-8 uses. Use granular chlorine and/or spa shock as

needed.

NOTE: Your system has a UVC germicidal bulb that needs to be

replaced every 12-18 months. Check with manufacturers manual for

details.

NOTE: Copper electrodes need to be replaced every 2-3 years and may

need to be cleaned periodically depending on varying water conditions.

See operation manual for details.

CLEAR | State of the Art Water Management | 9