ArtFox Lightning FLEX BEAM V8 Kullanıcı Kılavuzu - Sayfa 6

Taşkın Işık ArtFox Lightning FLEX BEAM V8 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ArtFox Lightning FLEX BEAM V8 13 sayfaları.

1. Button:

FUNCTION

DOWN / UP

ENTER

2. LCD Display Menu:

3. DMX IN/OUT:

For DMX512 links, use 3‐pin XLR plug cable to link the unit together;

4. Pothook:

Used to hook the safety cable

5. Fuse (T 3.15A):

Used to protect the unit from the damage of the over‐current;

6. POWER IN:

Used to connect to supply power;

7. POWER OUT:

Used to connect to supply power to the next unit;

3.2 Main Function

To select any functions, press the ENTER button until the required function is showing on the

display. Select the function by pressing the ENTER button and the display will blink. Use the

DOWN and UP button to change the mode. Once the required mode has been selected, press the

ENTER button to setup to go back to the functions without any changes press the ENTER button

again. Press the FUNCTION button exit the menu mode.

The main functions are shown below:

LEVEL 1

BEAM-V8

Addr=001

BEAM-V8

A=Auto

BEAM-V8

M=Auto

BEAM-V8

A=Music

BEAM-V8

M=Music

BEAM-V8

Slave

Address

=001

return to the upper menu one by one

To browse or change through the various Setup Options and change values (Add

or subtract).

To select the functions, save your settings or enter the next menu

Used to show the various menus and the selected functions;

LEVEL 2

LEVEL 3

LEVEL 4