Cleary Bikes Starfish Manuel - Sayfa 9

Bisiklet Cleary Bikes Starfish için çevrimiçi göz atın veya pdf Manuel indirin. Cleary Bikes Starfish 12 sayfaları.

INSTALL AND ADJUST SADDLE

INFLATE THE TIRES

Remove the dust cap from the tire valve and check the pressure using a pressure gauge. If you don't

have a pressure gauge, squeeze the tires. They should feel very firm, but give a little when strong

pressure is applied. Fill the tires to the recommended pressure using a bicycle pump with a "Schrad-

er" valve. Pressure recommendations can be found on the tire sidewall and also below.

12" Starfish - 35 to 40 PSI

12" Gecko - 35-40 PSI

16" Hedgehog - 40-65 PSI

20" Owl - 40-65 PSI

Loosen the seat post clamp bolt if necessary.

Slide the seat post into the seat tube. Position the

saddle so that it is approximately the same height

as your child's hip and tighten the seat post clamp

to secure.

Adjust the seat forward or back by loosening the

6 mm bolt underneath the saddle.

Your child should be able to sit on the saddle

and reach the handlebar grips with slightly bent

elbows.

page 9