DJ-Tech Cube 50 Kullanıcı Kılavuzu - Sayfa 5

Konuşmacılar DJ-Tech Cube 50 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DJ-Tech Cube 50 10 sayfaları. Wireless

Parts Description

1.MIC input(6.35 Phone jack)

This jack can take either a 6.3mm unbalanced or a balanced cable.

2.Line input (RCA)

You can connect your device to this socket with the RCA cable

3. Wireless MIC Receiver antenna

Connect the Antenna here.

4.Power Switch and Power indicator

This switch works as ON/OFF switch and shows the ON/OFF status of Cube

50.

5.Charging indicator

It shows the charging status: Red = Low Battery (20% left), Green =

Charging

6.MIC Volume

Turn MIC volume knob to adjust the volume, do not aim the microphone

to the speaker

7.Line Volume

This knob controls the volume of the RCA input.

8.Wireless MIC Volume

Turn this knob to adjust the wireless microphone volume

9. Wireless MIC RF Indicator

It shows the connectivity of the wireless microphone,

(Green = Good signal strength, Off = Wireless signal is not detected)

10.Talkover

When talkover is ON and signal on microphone is significant, music from

AUX and iPod will be attenuated.

11.Master Tone

This knob controls master output tone of the Cube 50.

12.Master Volume

This knob controls the master volume

２

４５

E-4

３

８９ 10 11

1２