DJ-Tech DX3000USB Kullanıcı Kılavuzu - Sayfa 4

Müzik Mikseri DJ-Tech DX3000USB için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DJ-Tech DX3000USB 12 sayfaları. Professional 7-channel usb dj mixer

Sayfayı Yazdır

switched to "PHONO", the inputs shall be terminated with the supplied termination plugs (as

factory-inserted at delivery).

15. USB connector. Connect to a computer with the included USB cable to use as an audio interface.

Audio from computer will be sent to CH5 of the mixer. The audio signal from Record output (9) will

be sent to computer.

PART NAME AND FUNCTIONS

16. AUX input. The RCA AUX input for Channel 1.

17. Input level meter for stereo channels. Display the current input level after the Gain control (20) and

allows visual adjustment to the same level for all inputs.

18. Equalizer for stereo channels. Allows the adjustment of the tonal balance for each of the stereo

inputs in three music-specific frequency bands with an adjustment range of -26/+12dB, thus

providing a virtual "kill" function for each frequency band if set to extreme attenuation.

19. Input selector for stereo channels. Switches between the inputs as indicated on the front panel. A

LED indicates the pressed position.

20. Gain control for stereo channels. Allows adjustment of the input sensitivity to compensate for

different source volumes.

21. PFL switch for stereo channels. Assigns the respective channel to the headphone bus for

pre-fader-listening (PFL). A LED indicates the pressed position.

22. Crossfader assignment switch. This switch determines whether the respective channel's signal is

sent to the left side (A) of the crossfader, the right side (B) of the crossfader or directly to the

master output (MASTER).

23. Effects on/off switch. Activates the effect from FX Return (11). Once the effect is active, this switch

is backlit.

(Top Panel)