AIMS Power PWRI30012S Kullanım Kılavuzu - Sayfa 2
İnvertör AIMS Power PWRI30012S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AIMS Power PWRI30012S 10 sayfaları. Dc to ac pure sine power inverter
A. INTRODUCTION
The AIMS Power pure sine inverter product line is used for back-up or mobile
power. The pure sine product line is ideal for sensitive equipment and provides
clean power, which is more efficient for back-up power applications. The power
inverter transforms DC (direct current) electricity into AC (alternating current) power
that can be used for running a wide variety of small devices using a battery. This
inverter is perfect for providing mobile power in vehicles, RVs, boats, vans or
buses.
Read this instruction manual carefully and make sure your inverter is installed
properly before using.
B. WARNING AND SAFETY
1. Keep manual for future reference.
2. Do not put the inverter under direct sunlight or near a heating source.
3. The case of the inverter will get hot when used. Do not allow flammable materials
to contact the inverter, such as clothing, sleeping bags, carpet or any other
flammable materials. The heat from the inverter can damage these items.
4. The power inverter is designed to be used with a negative ground electrical
system! Don't use with positive ground electrical systems (the majority of modern
automobiles, RVs, trucks and boats are negative ground).
5. Do not disassemble the unit: it may cause fire or electric shock.
6. This device should only be serviced by a qualified technician. This item does not
have any serviceable parts.
7. Prevent body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerator enclosures during installation.
8. Do not operate the inverter if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the inverter.
9. People with pacemakers should consult their physician(s) before using this
product. Electromagnetic fields in close proximity to a pacemaker could cause
interference to or failure of the pacemaker.
10. Keep the inverter well-ventilated. Do not place any objects on top of or next to
the inverter or allow anything to cover the cooling fans; doing so can cause the
inverter to overheat, causing a potential fire hazard and/or damage to the
inverter. Leave adequate ventilation space underneath the inverter as well; thick
carpets or rugs can obstruct air flow, causing the inverter to overheat.
11. Avoid unintentional starting. Be sure the switch is in the OFF position when not in
use and before plugging in any appliance.
12. Keep inverter away from children. Don't install the inverter where it is accessible
to children.
2