dji FlameWheel550 Kullanıcı Kılavuzu - Sayfa 5

Dronlar dji FlameWheel550 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dji FlameWheel550 8 sayfaları.

Tools Needed

Hex Wrench

Screw Glue

Nylon Cable Tie

Scissors

Diagonal Cutting Pliers

Foam Double Sided Adhesive Tape

Soldering-iron & wires

ESC

· Please solder ESCs to bottom board as the up figure shows. Use any insulating method at all soldering

spots.

· Make sure there is no short or open circuit.

· Make sure the side with bonding pads is upward.

2.0mm: For frame installation.

For fastening screws.

For binding devices and wires.

For fixing receiver, controller and other modules.

For connecting ESCs' power cables to bottom board

To Battery

Power Pads

ESC