AIMS Power PWRINV250012W Kullanım Kılavuzu - Sayfa 5
İnvertör AIMS Power PWRINV250012W için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AIMS Power PWRINV250012W 10 sayfaları. Dc to ac power inverter
Sayfayı Yazdırstatus of a LED shows which function is being shown on the digital display.
The display and button are used to help diagnose problems if they occur.
Function:
•
Green LED: DC Input Voltage
•
Red LED: AC Output Voltage
•
Orange LED: AC Output Wattage (Kilowatts)
•
Not Lit: Diagnostic Codes
Remote On/Off Switch
Some models include a remote port. An AIMS remote on/off switch may be
connected to the remote port. The optional remote on/off switch is a convenient
option to turn the inverter on/off if the inverter is installed in a hard to reach
area. Make sure the inverter is turned off before installing the remote switch.
Simply plug the switch into the remote jack. There are several ways to mount the
remote switch. The remote switch has 4 pre-drilled holes for mounting.
Measuring the AC Voltage
The output waveform of the inverter is a MODIFIED SINE WAVE. If you choose to
measure the AC output voltage, you must use a TRUE RMS MULTI METER. Using any
other type of voltage measuring device will result in an AC voltage reading of 10 to
30 volts lower than actual voltage. When using a true RMS multi meter, you will get
an accurate reading.
SAFETY PRECAUTIONS
•
Do not open the case of the inverter. The high voltage inside the unit is the same type of
power as your electrical outlets at home.
•
Do not let the cord of the inverter, or any appliance cord get wet. If you are operating the