dji Inspire 1 Hızlı Başlangıç Kılavuzu - Sayfa 8

Dronlar dji Inspire 1 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. dji Inspire 1 11 sayfaları.
Ayrıca dji Inspire 1 için: Hızlı Başlangıç Kılavuzu (10 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

7. Mounting the Gimbal and Camera

Remove the Gimbal Cover.

Rotate the Gimbal Lock to the unlocked position (to the right when

facing the nose of the aircraft). Insert the gimbal by aligning the

white mark on the gimbal with white mark on the Gimbal Lock.

Rotate the gimbal lock back into the locked position (to the left

when facing the nose of the aircraft).

Gimbal Cover

8. Preparing for Flight

Place the aircraft on a flat surface, in an open space, with the back facing you.

Move the Flight Mode Switch to the right to select P mode. ( P mode is Positioning

mode, A mode is ATTI mode, and the F mode is Function mode. )

Power on the remote controller.

Power on the aircraft and wait for the self-check to complete. Do not move the

aircraft during the self-check.

Ensure the remote controller is linked to the aircraft before flight. Re-link the remote

controller to the aircraft if it fails to connect. Refer to the INSPIRE 1 User Manual

on how to link.

Ensure the remote controller and your mobile device are connected with a USB

cable. Launch the DJI Pilot app when connecting to the aircraft for the first time,

and follow the instructions within the app.

Launch the DJI Pilot app and tap "Camera". Ensure the aircraft is functioning

normally by completing the Checklist.Beginner Mode is enabled by default when

you launch the DJI Pilot app for the first time. The aircraft's altitude and flight

distance is restricted when flying in Beginner Mode. We recommend you fly in

Beginner Mode when using the aircraft for the first time. You may disable Beginner

Mode in the settings page of the DJI Pilot app.

Calibrate Compass: tap"MODE"in the app and select "Compass Calibration" to

calibrate the compass, then follow on-screen instructions.

Attach propellers with the black nut onto motors with the black dot and spin

counter-clockwise to secure. Attach propellers with gray nut onto motors without a

black dot and spin clockwise to secure. Place all propellers onto the correct motor

and tighten by hand to ensure security before flight.

When not in P mode, the Inspire 1 will only maintain altitude, not position, and will

●

drift with wind or user inputs. Return to Home is not available in F mode.

9. Remote Controller Operation

The remote controller is by default set to Mode 2 ( throttle controlled by the left-hand stick ).

Adjust the tilt angle of camera by using the Gimbal Dial.

Left Stick

You can set the remote controller to different modes using the DJI Pilot app.

●

Gimbal Lock

Mounting Place

Gimbal Connector

Right Stick

Locked

DJI Pilot

App

Gimbal Dial