dji M300 RTK Kullanıcı Kılavuzu - Sayfa 3

Dronlar dji M300 RTK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dji M300 RTK 15 sayfaları.
Ayrıca dji M300 RTK için: Ürün Yazılımı Güncelleme Kılavuzu (6 sayfalar)

Sayfayı Yazdır

Safety at a Glance

1. Environmental Considerations

• Always fly at locations that are clear of building and other

obstacles.

• DO NOT fly above or near large crowds.

• Avoid flying at altitudes above 400 feet (120 m)*.

• Fly in moderate weather conditions with temperatures between

-20° to 50°C (-4° to 122°F).

• Please take additional caution when flying indoors as the

aircraft stabilization features may experience some interference.

• DO NOT fly when the wind speed exceeds 12 m/s or 27 mph.

Land the aircraft as soon as possible when the DJI Pilot app

prompts you to do so.

2. Pre-flight Checklist

• Ensure the remote controller and aircraft batteries are fully

charged.

• Ensure the propellers are in good condition and securely

tightened before each flight.

• Ensure there is nothing obstructing the motors. Check that the

motors are clean and free of stains.

• Check that the camera lens is clean and free of stains.

• Complete the pre-flight checklist displayed in DJI Pilot app.

Calibrate the compass and the IMU when the DJI Pilot app or

the status indicator prompt you to do so.

• Ensure the GPS satellite number is not less than 6 in the DJI

Pilot app.

• Altering or modifying the aircraft's parts may impact its stability.

Strictly follow DJI's official instruction to attach compatible

external equipment and please ensure that the overall weight

of the aircraft does not exceed 9 kg after attachment. Be sure

that the external equipment is mounted in the right position as

provided in the official instruction to avoid the displacement of

the aircraft's center of gravity.

• Ensure the vision system, infrared sensors, FPV cameras and

auxiliary lights lens are clean and free of stains or fingerprints,

and they are not obstructed by any parts (e.g. load attached).

• Ensure the frame arms are fully unfolded, the frame arms and

the landing gears are locked firmly.

• Ensure the rubber plug are inserted firmly when the ports on

aircraft and remote controller are not used.

• Make sure that all the cooling fans of the aircraft are free of

foreign objects, and there is no obstruction on the air intake

and the air vent. Also make sure that the fans work without any

abnormal noise.

3. IP44 Protection Rating

Under stable laboratory conditions, the M300 RTK achieves an

IP44 protection rating by IEC60529 standards when equipped

with TB60 Intelligent Flight Batteries. However, this protection

rating is not permanent and may reduce over time after long-term

use.

• DO NOT fly when the amount of rainfall exceeds 100 mm / 24 h.

• DO NOT fold the frame arms in the rain.

• Make sure the battery ports, battery compartment ports, battery

surfaces, and battery compartment surfaces are dry before

inserting the batteries.

• Make sure the battery ports and battery surfaces are free from

any liquid before charging the batteries.

• Before packing the aircraft into the carrying case, ensure that it

is free from any liquid by wiping it carefully.

• Product warranty does not cover water damage.

* The flying altitude restriction varies in different jurisdictions. DO NOT fly

above the maximum altitudes set forth in your local laws and regulations.

The DJI

MATRICE

300 RTK (M300 RTK) aircraft is NOT a

toy and is not suitable for children under the age of 18. Note

that 'Safety at a Glance' only provides a quick overview of the

safety tips. Make sure you read and understand the remaining

sections of this document.

The aircraft does not achieve IP44 protection rating in the

following circumstances:

• Folded frame arms.

• You use batteries other than the M300 RTK's TB60 Intelligent

Flight Batteries.

• The cover for the ports are not attached correctly.

• The weatherproofing top shell plug is not firmly attached to the

top shell.

• The aircraft is broken due to various reasons, such as broken

aircraft shell, failure of the waterproof adhesive, etc.

4. Operation

• DO NOT fly the aircraft from a moving vehicle.

• To avoid affecting the motor service life, do not take off or land

the aircraft on sandy or dusty areas.

• Stay away from the rotating propellers and motors.

• Maintain visual line of sight of your aircraft at all times.

• To stop the motors mid-flight, pull both remote controller sticks

to the bottom inner corner or bottom outside corner.

• Stopping the motors mid-flight will cause the aircraft to crash.

The motor can only be stopped mid-flight when the flight

controller detects critical error.

• While the aircraft is equipped with advanced technology, the

pilot's sound discretion is required during the flight. Safety and

flight assistance features such as obstacle avoidance, precise

landing, and landing protection, are designed to assist your

operation, not to replace it. Environmental conditions including

lighting and obstacle's texture may impact the performance of

the Vision System.

• DO NOT answer incoming calls, text messages or use any

other features of your mobile devices that may distract you

from operating your aircraft during flight. DO NOT fly under the

influence of alcohol or drugs.

• DO NOT fly closely above reflective surfaces such as water

or snow, as these terrains may affect the performance of the

Vision System.

• In the instance of a Low Battery Warning, land the aircraft

immediately at a safe location.

• During the Failsafe Return to Home procedure, the aircraft will

not be able to avoid the obstacles if the light condition is not

good. You can quit the Return to Home procedure and operate

the aircraft when the remote controller signal is obtained again.

Ensure to set an appropriate Failsafe altitude before each flight.

• After landing, first stop the motor, then turn off the Intelligent

Flight Battery, and then turn off the remote controller.

• While with advanced technology, the DJI Pilot app's sound

discretion is required during the flight. Safety and flight

assistance features such as obstacle avoidance, precise

landing, and landing protection, are designed to assist your

operation, not to replace it. Environmental conditions including

lighting and obstacle's texture may impact the performance

of the Vision System. Please set the Return to Home Altitude

higher than surrounding obstacles in the DJI Pilot app.

• Landing protection (detects if the ground is suitable for

landing at an altitude of 2 meters above the ground) is used

to optimize the operation experience. Always be alert when in

control of the aircraft as the vision system may be disabled in

certain situations (e.g. dim lighting or unclear obstacle surface

patterns), and ground surface detection may fail.