dji MATRICE 300 RTK Kullanıcı Kılavuzu - Sayfa 14

Dronlar dji MATRICE 300 RTK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dji MATRICE 300 RTK 15 sayfaları. Dual gimbal connector
Ayrıca dji MATRICE 300 RTK için: Ürün Bilgileri (17 sayfalar), Bakım Kılavuzu (19 sayfalar), Bakım Kılavuzu (19 sayfalar), Hızlı Başlangıç Kılavuzu (10 sayfalar), Ürün Bilgileri (10 sayfalar)

Sayfayı Yazdır

For Smart Controller:

SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified

power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the

device while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower

the power output.

Before a new model device is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the

exposure limit established by the FCC, Tests for each device are performed in positions and locations as required by the FCC.

For limb worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an

accessory designated for this product or when used with an accessory that contains no metal.

For body worn operation, this model device has been tested and meets the FCC RF exposure guidelines when used with an accessory

designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of

10mm from the body.

Non‐compliance with the above restrictions may result in violation of RF exposure guidelines.

SAR tests are conducted using standard operating positions accepted by the ISEDC with the device device transmitting at its highest certified

power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device

while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power

output.

Before a new model device is a available for sale to the public, it must be tested and certified to the ISEDC that it does not exceed the exposure

limit established by the ISEDC, Tests for each device are performed in positions and locations as required by the ISEDC.

For limb worn operation, this device has been tested and meets the ISEDC RF exposure guidelines when used with an accessory

designated for this product or when used with an accessory that contains no metal.

For body worn operation, this model device has been tested and meets the ISEDC RF exposure guidelines when used with an accessory

designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from

the body.

Non-compliance with the above restrictions may result in violation of RF exposure guidelines.

Les tests SAR sont effectués en utilisant des positions de fonctionnement standard acceptées par l'ISEDC avec l'appareil transmettant à

son niveau de puissance certifié le plus élevé dans toutes les bandes de fréquences testées, bien que le SAR soit déterminé au niveau

de puissance certifié le plus élevé, le niveau SAR réel de l'appareil pendant son fonctionnement peut être bien en dessous de la valeur

maximale, en général, plus vous êtes proche d'une antenne de station de base sans fil, plus la puissance de sortie est faible.

Avant qu'un nouveau modèle d'appareil ne soit disponible à la vente au public, il doit être testé et certifié auprès de l'ISEDC qu'il ne

dépasse pas la limite d'exposition établie par l'ISEDC. ISEDC.

Pour un fonctionnement avec des membres, cet appareil a été testé et répond aux directives d'exposition ISEDC RF lorsqu'il est utilisé

avec un accessoire désigné pour ce produit ou lorsqu'il est utilisé avec un accessoire qui ne contient pas de métal.

Pour un fonctionnement porté sur le corps, ce modèle d'appareil a été testé et répond aux directives d'exposition RF ISEDC lorsqu'il

est utilisé avec un accessoire désigné pour ce produit ou lorsqu'il est utilisé avec un accessoire qui ne contient pas de métal et qui

positionne le combiné à au moins 10 mm du corps.

Le non-respect des restrictions ci-dessus peut entraîner une violation des directives d'exposition aux RF.

DJI Support

DJI 技术支持

DJI 技術支援

DJI サポート

DJI 고객지원

DJI Support

Servicio de asistencia de DJI

Service client DJI

Assistenza DJI

DJI-ondersteuning

Assistência da DJI

Suporte DJI

Техническая поддержка DJI

http://www.dji.com/support

This content is subject to change.

Download the latest version from

www.dji.com/matrice-300

If you have any questions about this document, please contact DJI by

sending a message to [email protected].

MATRICE is a trademark of DJI.

Printed in China.

3GMDTRMA02