ARTHUR HOLM AH15D1HGA Kullanıcı Kılavuzu - Sayfa 9

Monitör ARTHUR HOLM AH15D1HGA için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ARTHUR HOLM AH15D1HGA 14 sayfaları. Hdcp compliant motorised monitors for furniture integration

Sayfayı Yazdır
OSD MENU
Setup
Language: OSD language selection
Restore Factory Default: Adjusts the parameters to the initial factory
parameters
Blending: OSD window transparency
∙ Low
∙ Medium
∙ High
∙ Off
OSD Duration: Adjusts the time that the OSD menu window remains on
screen
Software Update (USB): Used for firmware upgrade
Mirror:
0. Image with no flip
1. Vertical flip
2. Horizontal flip
3. Rotate
16

AHNET PROTOCOL

Communications protocol
COMMUNICATION
RS422
CONNECTION
RJ45
WIRING
CAT-5
Speed and configuration
BAUD RATE
38400
DATA BITS
8
PARITY
NONE
STOP BITS
1
Wiring Diagram
1. Data TX +
2. Data TX –
3. Data RX +
4. NC
5. NC
6 .Data RX –
7. NC
8. NC
Connection
PINS 1 & 2
The units respond
PINS 3 & 6
The units receive instructions
Protocol to control the monitor by addressable RS422 bus.
You can connect up to 30 monitors on the same RS422 bus.
You can use a AH Interface Ethernet, to control the RS422 bus.
The units should have a set address and the address must start by 1.
Maximum cable length between ends, 500 m/1640 ft.
RJ-45
17