dji Agras MG-1P Hızlı Başlangıç Kılavuzu - Sayfa 5
Quadcopterler dji Agras MG-1P için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. dji Agras MG-1P 12 sayfaları. Spreading systems
Ayrıca dji Agras MG-1P için: Kullanım Talimatları Kılavuzu (17 sayfalar)
Sayfayı Yazdır
4. Monitor Your Altitude: For the safety of full-sized aircraft and other air traffic, always
fly at altitudes less than 164 feet (50 meters) or according to local laws and
regulations.
Visit https://www.dji.com/flysafe/geo-map for more information on critical safety features such as No
Fly Zones.
Return-to-Home
It is important to take off with a strong GNSS signal to ensure that the Home Point is recorded by the
aircraft.The aircraft will automatically return to the Home Point in the following cases.
Smart RTH: You press the RTH button.
Failsafe RTH*: Remote controller signal is lost.
The aircraft can sense obstacles at a distance up to30 meters, then automatically avoid obstacle
andfly to the Home Point.
* The Failsafe RTH must be enabled in the DJI MG app. If not enabled, the aircraft will hover in place
when remote controllersignal is lost.
Using MG-1P/ MG-1P RTK
Preparing the Flight Battery
Only use DJI approved flight batteries (Model: MG-12000P). Checkbattery level before flying and
charge according to instructions providedby the manufacturer.
Preparing the Remote Controller
Checking Battery Level
Low → High
Press once to check the battery level.Press once, then again and hold to turn on/off.
Charging the Battery
Press the battery level button once to check the battery level. Fully charge the batteries before