dji PHANTOM 3 PROFESSIONAL Hızlı Başlangıç Kılavuzu - Sayfa 7

Quadcopterler dji PHANTOM 3 PROFESSIONAL için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. dji PHANTOM 3 PROFESSIONAL 10 sayfaları. Intelligent flight battery heater
Ayrıca dji PHANTOM 3 PROFESSIONAL için: Hızlı Başlangıç Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (3 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Gelişmiş Kılavuz (16 sayfalar)

5. Preparing the Remote Controller

Tilt the Mobile Device Holder to the desired position, and

then adjust the antennas as shown. The strength of the

Remote Controller's signal will fluctuate depending on the

positions of the antennas.

Strong

The transmission signal between the aircraft and

Remote Controller will be strongest within the

range illustrated here. If the signal is weak, adjust

the positions of the antennas and fly the aircraft

closer to achieve optimal signal performance.

To avoid signal interference, do not use other 2.4GHz devices when flying.

●

Here are the default flight controls (Mode 2). The left stick controls altitude and rotation, while the right stick controls the

forward, backward, left or right movements. The gimbal dial controls the camera's tilt.

Left Stick

You can customize or change these controls through the DJI GO app.

●

Weak

Right Stick

Press the button on the side of the Mobile

Device Holder to release the clamp.

Place your mobile device into the clamp and

adjust it so that the mobile device is held

securely in place.

Connect your mobile device to the Remote

Controller with a USB cable. Plug one end of

the cable into your mobile device, and the

other end into the USB port on the back of

the Remote Controller.

Gimbal Dial