FITNESS AUDIO DWR-2468 Kullanım Kılavuzu - Sayfa 9

Mikrofon sistemi FITNESS AUDIO DWR-2468 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. FITNESS AUDIO DWR-2468 12 sayfaları. 2.4ghz digital true diversity wireless system

Sayfayı Yazdır

Optional DH-2420 Digital Handmic

1. Cartridge

2. Battery power LED

3. 3-step power switch

(ON-MUTE-OFF)

3-STEP power switch

Power status

Lock status

unlocked

To prevent other user from turning off the power, you may slide this switch to the right

to lock the microphone on stand-by or mute status. Slide to the left to unlock.

Battery installation & indicator

This microphone requires 2 x AA batteries to operate. To install, remove the battery cover and

slide the batteries into the battery compartment & replace the battery cover.

When the microphone is switched ON, a blue LED will blink once to denote the batteries

installed are in good condition. If the LED remains illuminated, it means the batteries are

weak and require replacement.

Note: Batteries contain a corrosive acid that may leak and damage the microphone

when stored for a long period. Batteries should be removed from the microphone

before storing without use for more than 4 weeks.

CHANNEL SYNCHRONIZING of the Receiver and Handmic Transmitter

1. Unscrew the microphone's lower housing

and then press and hold the synchronizing

button until LINK flashes on the LCD.

CH:000

►

LINK

Wireless Microphone System Operating Manual

4. LCD

5. Menu button

6. Setting button

7. Channel synchronizing button

MUTE

locked

unlocked

2. Press and press and hold the receiver's

SYNC button until the frequency icon

appears. After successful channel

synchronizing, this icon will disappear

automatically.

8. Color cap

9. Battery compartment

10. Charging contacts

MUTE

locked

can't be locked

006

2407

SYNC

►

MHz

FREQ

CH.

OFF

FREQ