Artic AR-SC7P-96F-M Kurulum Kılavuzu - Sayfa 8

Medya Dönüştürücü Artic AR-SC7P-96F-M için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Artic AR-SC7P-96F-M 16 sayfaları. Horizontal fiber optic splice closure

Sayfayı Yazdır
Splitter tray
Fiber
5.3 Step Three - Determine length of fiber cable to be fixed and
stripped inside
5.3.1 According to the requirement, the ports are installed with fiber cable or drop cable
5.3.2 The fibers which are in the FOSC are used for branching splice. The length of stripping 
cable show in 3-1
5.3.3 a part of fiber cable for straight through, a part for branching splice, The length of 
stripping cable show in 3-2
Important issues: 
 
1- Reserve enough fiber cable. 
 
2- Determine the length of stripping cable. 
 
3- The customer can decide the stripping cable length by themselves if they have  
 
other requirement
Fiber cable
Temp. locating mark
INSTALLATION MANUAL HORIZONTAL FIBER OPTIC SPLICE CLOSURE AR-SC7P-xxxF-M
PLC splitter
Drawing 2
100mm fixing length of fiber cable inside FOSC
1750mm length of protective coat of fiber cable to be stripped off
150mmlength of fiber with protective coat
(from cable fixing point to FOST fixing point)
1600mmlength of protective coat of fiber to be stripped off
(Fusion with other fibers and be winded after being striped off)
Drawing 3-1 
Fiber
Hoop locking system
Fixing slot of heat
shrinkable protective sleeve
8