Artica v4.30.000000 Manuel Kurulum - Sayfa 11

Sunucu Artica v4.30.000000 için çevrimiçi göz atın veya pdf Manuel Kurulum indirin. Artica v4.30.000000 11 sayfaları.

Setup will extract the main Artica Firmware

Install minimal required services such as the Web console

and the framework.

Final: configure network

At the end, the setup will ask you to reconfigure your

network for the main interface "eth0"

This setup is mandatory because after rebooting the name

interface will be switched from ensxx to ethx

In this case you will not lost your server network after the

reboot.

Now type this command to reboot the system:

reboot

Page 11

Artica v4.x : http://articatech.net | contact: [email protected] | support: http://bugs.articatech.com