dji SMO Hızlı Başlangıç Kılavuzu - Sayfa 8

Kamera Aksesuarları dji SMO için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. dji SMO 10 sayfaları.

Sayfayı Yazdır

3. Mount your Mobile Device

Unfold the arms

Adjust the pads

Place one end

Pull outwards

Rotate to desired angle

Ensure your mobile device is fully seated.

4. Unlock the Gimbal

1. Rotate the tilt motor

2. Rotate the roll motor

3. Slide the Pan Axis Lock up

Place the other end

5. Connect to the DJI GO App

Internet

Follow the order above to avoid damaging the camera.

Rotate the motors just enough to loosen them.

To Power On:

Pull down on the switch

Pull down again > Sleep

Pull down and hold for 1.5 s > Power Off

Turn on your mobile's WiFi and

OSMO_XXXXXX

connect to

Default password:

12341234

OSMO_XXXXXX

Launch the app and tap

Enter Camera View.

Activate the Osmo if you are using it for the first time.

This requires an internet connection.

6. Controls

Pan or tilt the camera with

●

the joystick.

Position the camera

●

directly by hand.

Record Button

●

Press once to start recording,

and again to stop recording.

Shutter Button

●

Press once to take a photo.

Trigger

●

Hold down to enable Lock Mode.

Tap twice to center the camera.

Tap three times to enter Selfie

Mode.

SmoothTrack Mode is enabled automatically

to smooth out jerky movements.

The Osmo will beep slowly if the gimbal is

locked after it is turned on. This means the

camera is working normally but the gimbal is

shut off.

If you need to unlock the gimbal after it is

turned on, you must rotate the pan motor after

unlocking the tilt motor and pan motor to

reactivate the gimbal.

For more information, read the User Manual:

www.dji.com/product/osmo

※This Quick Start Guide is subject to

change without prior notice.