dji Zenmuse X5 Kullanıcı Kılavuzu - Sayfa 10
Kamera Aksesuarları dji Zenmuse X5 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dji Zenmuse X5 18 sayfaları. For inspire 1 pro
Ayrıca dji Zenmuse X5 için: Kullanıcı Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (11 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Manuel (11 sayfalar)
Sayfayı Yazdır
ZENMUSE X5 User Manual
Mounting the Zenmuse X5 to the Inspire 1
(Watch Video: http://www.dji.com/product/inspire-1/video)
Ensure the aircraft is installed with Landing Gear Risers.
Replace the Inspire 1 Gimbal Mounting Plate
1. Remove the two black dampers at the front.
2. Disconnect the 10-PIN cable and 8-PIN cable in order. Be careful not to damage the
gimbal cables.
3. Remove the other two black dampers.
4. Attach the new gimbal mounting plate as shown below. With their flat sides facing
outwards, align the rear mounting plates with the rear bracket's screw holes. Tighten the
screws with a screwdriver.
5. Connect the 8-PIN cable and 10-PIN cable in order.
6. Place the front mounting bracket to the front bracket with its grooved side facing inwards.
Adjust the 8-PIN cable and 10-PIN cable to avoid protrusion, and then tighten the screws.
10
©
2016 DJI. All Rights Reserved.
Rear Mounting
Plate
Front Mounting
Plate
Mounting
Position