dji A3 pro Hızlı Başlangıç Kılavuzu - Sayfa 6

Uzaktan Kumanda dji A3 pro için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. dji A3 pro 8 sayfaları.

Sayfayı Yazdır
dji A3 pro Hızlı Başlangıç Kılavuzu
A3 / A3 Pro Quick Start Guide
Parts
1
2
EN
9
10
Flight Controller
1. IMU1 Port
Communicates with the IMU Pro module.
2. CAN1 Port
Dedicated DJI CAN-Bus port. Communicates with the
GPS-Compass Pro module or other DJI devices (e.g. Vision
Position System and Real Time Kinematic (RTK) GPS system).
3. Orientation Arrow
The flight controller should be mounted with the arrow
pointing to the aircraft's nose.
4. Status Indicator
Indicates the status of the flight controller and triple modular
redundancy system.
5. RF Port
Communicates with the DJI Lightbridge 2 receiver.
1
2
IMU Pro Module
1. Orientation Arrow
The IMU Pro module should be mounted with the arrow
pointing to the aircraft's nose.
2. Status Indicator
Indicates the status of the IMU Pro module and triple
modular redundancy system.
3. CAN1 GPS Port
Communicates with the GPS-Compass Pro module.
LED Module
1. Flight Status Indicator
Indicates the status of the flight control system.
2. Micro USB Port
Used to configure and upgrade the A3 or A3 Pro via the DJI Assistant.
©
2015 DJI. All Rights Reserved.
04
3
4
6. iESC Port
Communicates with the DJI Intelligent ESC.
5
7. M1-M8 Pins
6
Connect to the corresponding ESC PWM port for each
4
7
motor.
8
8. LED Port
Communicates with the LED module.
11
9. IMU2 Port
12
Communicates with the IMU Pro module.
13
14
10. iBAT Port
15
Receives power from a DJI Intelligent Flight Battery or
16
other LiPo battery.
17
11. CAN2
Communicates with an SDK device.
12. API Port
Communicates with an SDK device.
13. USB OTG Status Indicator
Indicates the status of the USB OTG port.
14. USB OTG Port
Two-way communication port for SDK devices.
15. F5-F8 Pins
Multifunction PWM I / O ports.
16. F1-F4 Pins
Multifunction PWM output ports.
17. S-Bus Port
Communicates with a DJI DR16 or S-Bus receiver.
3
GPS-Compass Pro Module
1. Orientation Arrow
The GPS-Compass Pro module should be mounted with
the arrow pointing to the aircraft's nose.
2. Status Indicator
Indicates the status of the GPS-Compass Pro module
and triple modular redundancy system.
3. Extended CAN1 Port
Dedicated DJI CAN-Bus port. Communicates with a
DJI device (e.g. Vision Position System and Real Time
Kinematic (RTK) GPS system).
3
1
2
1
2