dji Cendence Kullanıcı Kılavuzu - Sayfa 19

Uzaktan Kumanda dji Cendence için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dji Cendence 20 sayfaları.
Ayrıca dji Cendence için: Kullanıcı Kılavuzu (7 sayfalar)

Sayfayı Yazdır

Appendix

Upgrading the Remote Controller Firmware

Using the DJI GO 4 App

Power on the remote controller and connect it with the DJI GO 4 app. A prompt will appear if a

new firmware upgrade is available. To start upgrading, connect a mobile device to the Internet and

follow the on-screen instructions.

Ensure the DJI GO 4 app has access to the Internet.

Ensure the battery level is adequate for the remote controller.

Do not disconnect the aircraft from the computer during a firmware upgrade.

Specifications

Remote Controller (Cendence)

Model

Operating Frequency

Max Transmitting Distance

(unobstructed, free of interference)

EIRP

Power Supply

Intelligent Battery

Charging

Output Power

Video Output Ports

USB Power Supply

Dual User Capability

Operating Temperature

Storage Temperature

Charging Temperature

Supported Displays

Charging Time

Maximum Run-time

Support DJI Aircraft

Weight

GL800A

2.400-2.483 GHz; 5.725-5.825 GHz

2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE);

2.5 miles (4 km, SRRC)

5.8 GHz: 4.3 miles (7 km, FCC);1.2 miles (2 km, CE);

3.1 miles (5 km, SRRC)

2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC)

5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC)

Extended Intelligent Battery (Model: WB37-4920mAh-7.6V)

4920 mAh LiPo

DJI charger

20 W (supplying power to DJI CS550 monitor);

12 W (without supplying power to a monitor)

USB, HDMI, SDI

iOS: 1 A, 5.2 V (Max); Android: 1.5 A, 5.2 V (Max)

Master-and-Slave connection

-4° to 104° F (-20° to 40° C)

Less than 3 months: -4° to 113° F (-20° to 45° C)

More than 3 months: 72° to 82° F (22° to 28° C)

41° to 104° F (5° to 40° C)

DJI CrystalSky Monitor

Mobile devices, e.g.iPhone, iPad (a Cendence mobile

device holder is required)

About 2 hours and 24 minutes (via the charging port using

a 180W charger)

About 4 hours (only Master remote controller function

enabled and without supplying power to monitor)

Inspire 2 and Matrice 200 series

1041 g