dji OSMO ACTION Kullanıcı Kılavuzu - Sayfa 6

Uzaktan Kumanda dji OSMO ACTION için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dji OSMO ACTION 20 sayfaları. Bluetooth remote controller
Ayrıca dji OSMO ACTION için: Kullanıcı Kılavuzu (16 sayfalar), SSS (4 sayfalar), Hızlı Başlangıç Kılavuzu (9 sayfalar)

Sayfayı Yazdır

Screen Description

The screen displays the status of the connected camera, the battery level of the remote

controller, and other information. When controlling multiple cameras, the screen displays the

number of cameras connected. The display on the screen varies depending on the camera

mode.

1. Verification Code: displays the verification code. When the camera is found, both the remote

controller screen and the camera screen show the same verification code. Tap Accept on the

camera screen.

2. GPS Signal: displays GPS signal strength. When the remote controller is searching for the

GPS signal, the

3. Battery Level: displays the battery level of the remote controller.

4. Connection Status: displays the connection to the camera via Bluetooth.

5. microSD Card Information: displays either the remaining number of photos or the video

duration that can be taken or recorded according to the current shooting mode. The icon is

displayed only when a camera is connected.

6. Screen Information: the camera information will be synchronized when the camera is

connected.

The screen will enter sleep mode if there is no operation within 3 minutes. The remote

controller will power off if there is no operation after 10 minutes when there is no camera

connected and the remote controller is not charging. When the screen is off, press any button

to exit sleep mode and continue using the remote controller.

icon will be displayed.