dji Zenmuse X5 Kullanıcı Kılavuzu - Sayfa 5

Dijital Kamera dji Zenmuse X5 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dji Zenmuse X5 18 sayfaları. For inspire 1 pro
Ayrıca dji Zenmuse X5 için: Kullanıcı Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (11 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Manuel (11 sayfalar)

Sayfayı Yazdır

Remote Control Calibration

Stick Mode

Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.

Do not change unless familiar with your new mode.

Press C1 or C2 button to switch from pitch mode to yaw mode. You may use the gimbal dial to pan the

gimbal under yaw mode. Press C1 or C2 again to exit yaw mode.

While pressing the C1 button, turn the gimbal dial to focus the X5 camera manually.

While pressing the C2 button, turn the camera settings dial to fine tune the roll axis of the gimbal.

Using DJI GO App to Control Gimbal

Follow the steps below to use DJI GO app to control the gimbal orientation:

1. Launch DJI GO app, enter "Camera" page.

2. Tap and press on the screen until a blue circle is shown.

3. Slide to control the gimbal orientation within the "Camera" page as shown below.

P-GPS

Gimbal Pitch/Yaw

Linking Remote Controller

210

V.S

H.S

232

2.3

4.2

M/S

RC Control Setting

Reset gimbal yaw

You can customize the C1 and C2 buttons on the back

of the remote controller.

Safe to Fly (GPS)

ISO 100

1/320

F 0

EV 0

INSPIRE 1 PRO User Manual

4821 4K 24

LOG

AF/MF