Fitness Technology 400 Series Manuel - Sayfa 11

Fitness Ekipmanları Fitness Technology 400 Series için çevrimiçi göz atın veya pdf Manuel indirin. Fitness Technology 400 Series 11 sayfaları. Performance force plate

Sayfayı Yazdır

FORCE PLATE 400 Kg Capacity

10.

To determine the cause of the fault close the test program, disconnect the USB cable, and swap

over the pluggable terminal blocks so that the channel 1 & 2 pair is plugged into channel 3 & 4 and 3

& 4 go into 1 & 2. Now reconnect the USB cable and run the test program and repeat step 8. If the

faulty channel moves (in this case to CH #1) then there is a connection, cable, or load cell fault. If on

the other hand the fault doesn't move then the XPV7 circuit board is faulty.

11.

Next you should compare the A/D Settings at the bottom of the dialogue box, these numbers should

match exactly with what you have on screen. If these numbers do match then there is a hardware

fault on the XPV7 circuit board.

If these numbers don't match then contact our repair centre for further instructions on resetting these

values.

Fitness Technology, 21 Bishop Street, Skye SA 5072 Australia

Tel: +61 8 8331 9229

FORCE PLATE 1000 Kg

Capacity

Mob: 0418 815 400.

March 2005.

www.fittech.com.au

Issue 2.00, 21st Aug 2008