dji ZENMUSE X5S Kullanıcı Kılavuzu - Sayfa 6
Dijital Kamera dji ZENMUSE X5S için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dji ZENMUSE X5S 19 sayfaları.
Sayfayı YazdırZENMUSE X5S User Manual
Panasonic Lumix 15mm/1.7
Panasonic Lumix 14-42mm/3.5-5.6 HD
Olympus M.Zuiko 12mm/2.0
Olympus M.Zuiko 17mm/1.8
Olympus M.Zuiko 25mm/1.8
Olympus M.Zuiko 45mm/1.8
Olympus M.Zuiko 9-18mm/4.0-5.6
For sharp and clear video, the shutter speed should be no shorter than 1/500s when
using a focal length of 15mm; and 1/600s when using a focal length of 25mm.
Required Lens Accessories
The performance of the gimbal is affected by the weight of the camera. The following table shows
the recommended DJI Balancing Ring, Balancing Cap, filter and lens hood required for each lens
model. Details are shown as below.
Lens
DJI MFT 15mm/1.7 ASPH
Panasonic Lumix 15mm/1.7 BR-Φ46-10 Not Required 46 mm
Panasonic Lumix 14-
42mm/3.5-5.6 HD
Olympus M.Zuiko 12mm/2.0 BR-Φ46-10 Not Required 46 mm
Olympus M.Zuiko 17mm/1.8 BR-Φ46-10 Not Required 46 mm
Olympus M.Zuiko 25mm/1.8 BR-Φ46-10 Not Required 46 mm
Olympus M.Zuiko 45mm/1.8 BR-Φ37-8
Lens
Olympus M.Zuiko
9-18mm/4.0-5.6
The thread size and weight of the Balancing Ring/ Balancing Cap are included in the model number, i.e.:
BR-Φ46-10 has a thread size of 46 mm and a weight of 10 g.
Choose the appropriate balancing ring/balancing cap based on the lens required.
Ensure to attach the balancing ring (A)/balancing cap and the balancing ring(B)
simultaneously, as illustrated when using the Panasonic Lumix 14-42mm/3.5-5.6 HD,
Olympus M.Zuiko 45mm/1.8 and Olympus M.Zuiko 9-18mm/4.0-5.6. Attach the filter
when the balancing ring (B) is not in use.
Two balancing rings, as illustrated, are required when using the Olympus M.Zuiko
17mm/1.8. When using a filter, remove a balancing ring.
The balancing cap should be attached to the rear of the lens when using the Olympus
M.Zuiko 9-18mm/4.0-5.6. Detach the original rear cap of the lens before attaching the
required balancing cap.
6
©
2017 DJI All Rights Reserved.
DJI Balancing Ring
A
BR-Φ46-10 Not Required 46 mm
BR-Φ37-17 BR-Φ37-6
DJI Balancing
DJI Balancing
Cap
Ring B
BC-Φ60-78
BR-Φ52-10
B
Thread Size Weight
37 mm
BR-Φ37-6
37 mm
Thread Size Weight
52 mm
Filter
Lens Hood
10 g
Required
10 g
Required
6 g
Not Required
10 g
Not Required
10 g
Not Required
10 g
Not Required
6 g
Not Required
Filter
Lens Hood
10 g
Not Required