AIMS Power CON120AC36/48VDC Kullanıcı Kılavuzu - Sayfa 6
Medya Dönüştürücü AIMS Power CON120AC36/48VDC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AIMS Power CON120AC36/48VDC 12 sayfaları. Ac converter / battery charger
Sayfayı Yazdır
2.
Installation
2.
Installation
2.1
Front
Panel
D
2.1
Front
Panel
D
Main Switch
ON： Once the unit has been properly installed and batteries are connected，flip the switch to
"ON", the unit will turn on automatically, and works according to the input AC source's status.
OFF：Flip the switch to "OFF", the unit will turn off.
BTS Port
A battery temperature sensor (BTS) can be used to ensure proper charging of the batteries based on
temperature. Installing a BTS extends battery life by preventing overcharging in warm temperatures and
undercharging in cold temperatures.
Ground Terminal
Connect the GND to the Ground Terminal using 8 AWG wire.
Battery Terminals
Connect the Battery to the Positive(+) Battery Terminal and the Negative(-) Battery Terminal. Do NOT
reverse the polarity.
Battery Voltage Switch
The AC converter can output two voltage types, which can be set using the dial switch.
NOTE: The Battery Voltage Switch must be adjusted when the unit if off.
and
Operation
and
Operation
escription
escription
Figure 1
Table 2 – 1: Battery Model Select
SW3
0
1
Front Panel
Battery Model
36V Model
48V Model
- 6 -