Artidor AR-077 Series Kullanıcı Kılavuzu - Sayfa 11

Aydınlatma Ekipmanları Artidor AR-077 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Artidor AR-077 Series 16 sayfaları. Explosion-safe signal lights

Sayfayı Yazdır
9.
Installation instructions
General
Installation of explosion-safe equipment must be carried out by personnel specially trained and
qualified to do this following the relevant requirements of the installation standard EN 60079-14.
For the installation and use of this product the relevant safety regulations and the generally recognized
latest state of the technology apply. Follow the national regulations and legal requirements.
Take care that the framework, screws and mounting surface are strong enough to take the weight of
the signal light.
The general arrangement and mounting sizes are given in the drawing above.
The supplied wall mounting brackets must be installed according the dimensional drawing above.
Isolate electrical power prior to installation.
For the model "with factory sealed cable"
Follow the instructions as stated under the previous heading 'General'.
The signal light with factory sealed cable is suitable for wall-mounting by using the wall mounting
bracket. The light is also suitable for mounting on a flat surface in which case the mounting bracket will
not be used.
Connect an earth wire to the external earth boss and ensure that it is sufficiently connected to ground.
Install the connection cable and make sure that it is protected from mechanical and chemical
influences.
Connect the end of the cable in a proper way to an external connection box and ensure this is done
professionally. The connection box is not supplied. When a connection box is selected, make sure that
it is suitably protected for the (explosion hazard) classification of the surroundings in which it will be
used.
The connection cable for the 230 V AC version has three wires for the following connections:
- Brown:
- Blue:
- Green / Yellow:
The 24, 48 ,60 and 115 V AC/DC versions have a different cable with the following color coding:
- Black (1):
- Black (2):
- Green / Yellow:
User manual explosion-safe AR-077 signal light
Issue April 2020
Phase
Neutral
Ground
Phase or (+)
Neutral or (-)
Ground
Black 1
Black 2
11 / 16