DJO Chattanooga Intelect Advanced Series Kullanıcı Kılavuzu - Sayfa 15

Tıbbi Ekipman DJO Chattanooga Intelect Advanced Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DJO Chattanooga Intelect Advanced Series 19 sayfaları.

Sayfayı Yazdır

BATTERY OPERATION

Charging Battery Module

Use the following instructions to properly charge the Intelect Advanced

Battery Module for use. Battery begins charging automatically when

system is plugged into an approved power outlet.

When to Recharge

• Charging of the Battery Module is required when the Battery Indicator

icon begins flashing.

WARNING

• When charging battery module, make certain the system is electrically

grounded by connecting only to a grounded electrical service

receptacle conforming to the applicable national and local electrical

codes. Using any other power source will cause extensive damage

to internal components and render the system unsafe for patient

therapy.

With the Battery Module installed

on the Intelect Advanced Therapy

System, plug the system into an

approved, grounded power outlet.

The Lightning Bolt icon will display

indicating the battery is charging.

As the battery charges, the Battery

indicator icon will progressively fill

until it is solid black indicating full

charge.

NOTE:

The Lightening Bolt icon will contin-

ue to display as long as the system

is connected to a power source.

BATTERY

LIGHTENING

INDICATOR

BOLT ICON

ICON

• Charge the battery according to the instructions found in this

manual. Never attempt to charge the battery on any other

charging mechanism.

• Use the battery module only with the Intelect Advanced

Therapy System.

• Do not reverse the polarity of the battery module. Doing so can

increase the individual cell temperature and cause cell rupture or

leakage.

Charging Temperature

• Charging efficiency is optimum within a temperature range of 10 °C to

30 °C (50 °F - 86 °F). Charge the Battery Module within this

temperature range.

• At temperatures below 0 °C (32 °F) the gas absorption reaction is not

sufficient and causes an increase of the gas pressure inside the

battery. This condition can activate the safety vent and lead to alkaline

gas leaking and battery performance deterioration.

• Charging efficiency of the battery module drops at temperatures above

40 °C (104 °F) and can disrupt full charging, lead to deterioration in

performance and battery cell leakage.

Reverse Charging

• Never attempt reverse charging. Charging with polarity reversed can

cause a reversal in battery polarity creating gas pressure inside the

battery, which can activate the safety vent, cause alkaline electrolyte

leakage, rapid deterioration in battery performance, battery swelling or

battery rupture.

Intelect Advanced Battery Module

DANGER