Artila Matrix-702 Donanım Kılavuzu - Sayfa 10
Ağ Geçidi Artila Matrix-702 için çevrimiçi göz atın veya pdf Donanım Kılavuzu indirin. Artila Matrix-702 13 sayfaları. Linux-ready cortex-a5 industrial iot gateway
Sayfayı Yazdır
3. Pin Assignment and Definitions
3.1 LED Indicators
The LED provides the Matrix-702 operation information. The LED status is described
as follow:
"READY" (Ready LED indicator): Ready LED will turn on in green color while
power is properly supplied. After system is ready for operation, Ready LED will
keep in solid orange color and a beep will be heard
"LINK" (Network LED indicator): Link and Activity LED will turn ON when the
communication mPCIe Module installed. When there is network data traffic, this
LED will flash.
"LINK" LED indicators (controlled by GPIO: PA23) is defined by user.
Please refer to "Status" LED indicator's programming on software guide.
3.2 Ethernet LAN Port
The Ethernet Port use RJ45 connector for both
LAN1: Gigabit Ethernet port and LAN2: 10/100Mbps Ethernet port
Pin definition of GigaLAN port (LAN1)
PIN
Signal
1
TP0 +
2
TP0 -
3
TP1 +
6
TP1 -
4
TP2 +
5
TP2 -
7
TP3 +
8
TP3 -
ARTILA
Matrix-702 Hardware Guide
10