Artila Matrix 504 Hızlı Kurulum Kılavuzu
Masaüstü Artila Matrix 504 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Artila Matrix 504 7 sayfaları. Arm9-based embedded computer
Overview
Matrix 504 is a Linux ready, ARM9-based embedded computer.
Its lower power and robust design concept makes it an ideal
industrial computer platform for harsh environment. The Linux
OS and file system are pre-installed in the on-board Flash
memory and the GNU tool chain CD coming with Matrix 504 is
ready for your application development.
Features
1.
ARM926EJ-S ARM Thumb Processor 400MHz w/MMU
2.
32-KByte Data Cache and 32-KByte Instruction Cache
3.
128MB SDRAM, 128MB NAND Flash on board
4.
One 10/100 Mbps Ethernet
5.
Two USB 2.0 full speed (12 Mbps) Host Ports
6.
One software configurable RS-232/422/485 port and three
RS-232/485 ports
7.
One serial console port
8.
5 programmable GPIO
9.
9 to 48VDC power input
10.
Pre-installed Linux 2.6.29 kernel and file system
11.
GNU tool chain available in Artila CD
12.
Optional DIN RAIL mounting adaptor
Packing List
Matrix 504 is shipped with following items
1. Matrix 504
2. Artila CD includes Tool Chain, Installation guide and
Utility software and device driver and example programs
Optional Accessory
1.
CB-RJ45F9-150: RJ45 to DB9 Female Cable
2.
CB-RJ2CON-100: Serial Console Cable
3.
DK-35A: DIN RAIL Mounting Kit
4.
PWR-12V-1A: 110~240VAC to 12VDC 1A Power
Adaptor
Matrix 504 Quick Installation Guide
Matrix 504 Layout
USB2.0 Host x2
Reset
USB Port
The USB port is an USB2.0 high speed host port. It can be
10/100Mbps Ethernet
used to expand the hardware function of Matrix 504 and
exchange file and data between PC and Matrix 504 using an
9-48VDC Power
USB flash disk. Currently the hardware support by Matrix 504
USB is shown as follow:
Serial Console
1.
USB Storage Device
2.
USB to Wireless LAN Adaptor (Ralink RT73)
3.
USB to Serial Adaptor (fdti usb to UART)
4.
USB to Modem (CDC compliant)
Power LED
5.
USB Camera
System Ready LED
The USB client port is reserved for production purpose only.
Ethernet LED
Contact Artila if you find your hardware is not shown on the
list.
Serial Port LED
Reset Button
Press the "Reset" button to activate the hardware reset. Please
always use "reboot" command to reset Matrix 504. You should
only use this function if the software reboot does not function
properly.
Power LED
The Power LED will show solid green if power is properly
P1/P2/P3/P4
applied
Serial Ports