FITRE TRILLO3PN Kurulum ve Kullanım Kılavuzu - Sayfa 3
Aksesuarlar FITRE TRILLO3PN için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. FITRE TRILLO3PN 8 sayfaları. Telephone and door bell loud ringer
Sayfayı Yazdır
POLE 1
ACOUSTIC SIGNAL VOLUME MODE
POLE CONDITION
1
ON
OFF
POLE 2
SETTING OF CONNECTED PHONE
POLE CONDITION
2
ON
OFF
EXTERNAL SPEAKER
TERMINALS
Amplified output for the connection
of up to 2 speakers Fitre AP29/8;
maximum power: 8W/4Ohm
PHONE CALL
TERMINALS
Phone call terminals: parallel
connection to telephone line
(PSTN) or PBX extension
DOOR BELL TERMINALS
ALLOWED
TERMINALS
VOLTAGE
voltage free
none
contact
1.5÷40 V AC
Ac/Dc
2.5÷60 V DC
EXTERNAL RELAIS
TERMINALS
12V
output to activate an
DC
external relais with coil resistance
> 80Ohm; activation persists
during all the incoming call
signalling
MAIN POWER
2 poles plug for 240Vac - 50Hz
main (ground connection not
needed thanks to class 2
insulation)
SETTINGS AND CONNECTIONS
MICROSWITCH SETTINGS
INCREMENTAL
(first 3 ringings)
COSTANT
AB PHONE
LB PHONE
1 2 3 4
ON
OFF
3
3
INTERNAL VIEW
SOUND MODULATION SETTING
POLES CONDITION
3
4
ON
ON
OFF
ON
ON
OFF
OFF
OFF
(1) Set Pole 2 to OFF only if the device is connected to a LB
phone.
FACTORY SETTINGS:
ALL POLES SET TO ON
1 2 3 4
Trillo 3PN • part number 7331250
POLES 3 - 4
MODULATION
MODULATION 1
MODULATION 2
MODULATION 3
MODULATION 4
TEST BUTTON
Test button for acoustic signal
setting
• keep the button pressed to
simulate incoming call
VOLUME SETTING
external speaker
Pot for external speaker volume
setting
• clockwise: increase volume
• counter clockwise: decrease
volume
VOLUME SETTING
internal speaker
Pot for internal speaker volume
setting
• clock wise: increase volume
• counter clock wise: decrease
volume
Signal wires inlet