Altronix HubWay82CD Kurulum Kılavuzu - Sayfa 2
Anahtar Altronix HubWay82CD için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Altronix HubWay82CD 9 sayfaları. Passive utp transceiver hub with integral camera power
Sayfayı Yazdır
Altronix HubWay8CD/16CD Passive UTP Transceiver Hub with Integral Camera Power transmits UTP video, RS422/
RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 or 16 camera channels in a space
saving 1U EIA 19" rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750
ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv,
HubWayAv2, HubWayDv or HubWay Dvi Video Balun/Combiners. In addition, the unit features individually selectable
24VAC or 28VAC PTC protected outputs with surge suppression. An optional HubSat4D Passive UTP Transceiver Hub
with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5
or higher structured cable back to the HubWay8CD/16CD. In addition, the HubSat4D provides power to these cameras
locally to eliminate the possibility of voltage drop associated with long cable runs.
HubWay8CD/82CD/83CD
Input:
• 115VAC 60Hz, 1.5 amp.
Video:
• Eight (8) channels of video over twisted pair up to
a distance of 750 ft. per channel.
• Eight (8) 75 ohm video outputs.
Power:
• Unit provides up to 1 amp max. per channel not to
exceed a total of 5 amp (150VA) maximum current.
Agency Listings:
• UL Listed for Commercial CCTV Equipment (UL 2044).
CUL Listed - CSA Standard C22.2 No.1-04, Audio,
Video and Similar Equipment.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power outputs
with OFF position.
• PTC protected outputs are rated @ 1 amp per channel.
• Surge suppression.
Visual Indicators:
• AC input power indicator.
HubWay82CD
• HubWay8CD with eight (8) UL Listed Accessory
HubWayAv Video Balun/Combiners for 24VAC Cameras.
HubWay83CD
• HubWay8CD with eight (8) UL Listed Accessory
HubWayDv Video Balun/Combiners for 12VDC Cameras.
WARNING: To reduce the risk of fire or electric shock do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to all local codes.
- 2 -
Overview:
HubWay Specifica tions:
HubWay16CD/162CD/163CD
Input:
• 115VAC 60Hz, 3 amp.
Video:
• Sixteen (16) channels of video over twisted pair up to
a distance of 750 ft. per channel.
• Sixteen (16) 75 ohm video outputs.
Power:
• Unit provides up to 1 amp max. per channel not to
exceed a total of 10 amp (300VA) maximum current.
Common Specifica tions:
Features:
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U rack mount chassis for use in standard EIA 19" rack.
Accessories:
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayAv2 - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with non-isolated 12VDC cameras.
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
Additional Models:
HubWay162CD
• HubWay16CD with sixteen (16) UL Listed Accessory
HubWayAv Video Balun/Combiners for 24VAC Cameras.
HubWay163CD
• HubWay16CD with sixteen (16) UL Listed Accessory
HubWayDv Video Balun/Combiners for 12VDC Cameras.
HubWay Passive Unit