Custom Crimp PLC Series Operatör El Kitabı - Sayfa 9

Test Ekipmanları Custom Crimp PLC Series için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Custom Crimp PLC Series 19 sayfaları. Test bench

Sayfayı Yazdır

TEST PROCEDURE

After the system initializes and

loads, the "Begin Test" screen

will appear.

Enter the max test pressure.

Keypads will pop up for set-

tings not indicated by arrows as

shown on the next screen.

Enter the number of times that

the test is to be run.

If test parameters and test

setup is correct, start test.

Innovating SMART Hose Assembly Solutions Since 1979

Press New Test to initiate a test

or Repeat Test to repeat the

previous test.

Set the time for the hose to be

held at test pressure.

Enter the delay time between

test cycles.

Test progress is shown.

Press the pressure button to

bring up the pressure adjust-

ment keypad screen.

Enter the minimum pressure

allowed during the test cycle.

Review test parameters prior to

running test.

Test results are shown and the

print option is available.